View A42L8316_376804.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

A42L8316 Series
Preliminary
Document Title 256K X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Revision History
Rev. No.
0.0 0.1
256K X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE
History
Initial issue Modify AC data
Issue Date
January 26, 1999 August 20, 2002
Remark
Preliminary
PRELIMINARY
(August, 2002, Version 0.1)
AMIC Technology, Inc.
A42L8316 Series
Preliminary
Features
n Organization: 262,144 words X 16 bits n Part Identification - A42L8316 (512 Ref.) n Single 3.3V power supply/built-in VBB generator n Low power consumption - Operating: 110mA (-30 max) - Standby: 2.5mA (TTL), 1.5mA (CMOS) 1.0mA (Self-refresh current) n High speed - 30/35/40 ns RAS access time - 16/17/18 ns column address access time - 9/10/11 ns CAS access time - 14/16/18 ns EDO Page Mode Cycle Time n Industrial operating temperature range: -40C to 85C for -U n Fast Page Mode with Extended Data Out n Separate CAS ( UCAS , LCAS ) for byte selection n 512 Refresh Cycle in 8ms n Read-modify-write, RAS -only, CAS -before- RAS , Hidden refresh capability n TTL-compatible, three-state I/O n JEDEC standard packages - 400mil, 40-pin SOJ - 400mil, 40/44 TSOP type II package
256K X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE
General Description
The A42L8316 is a new generation randomly accessed memory for graphics, organized in a 262,144-word by 16bit configuration. This product can execute Byte Write and Byte Read operation via two CAS pins. The A42L8316 offers an accelerated Fast Page Mode
This allow random access of up to 512 words within a row at a 71/62/55 MHz EDO cycle, making the A42L8316 ideally suited for graphics, digital signal processing and high performance computing systems.
Pin Descriptions
Symbol Description Address Inputs Data Input/Output Row Address Strobe Column Address Strobe for Lower Byte (I/O0 - I/O7) Column Address Strobe for Upper Byte (I/O8 - I/O15) WE OE VCC VSS NC Write Enable Output Enable 3.3V Power Supply Ground No Connection
Pin Configuration nSOJ
VCC I/O0 I/O1 I/O2 I/O3 VCC I/O4 I/O5 I/O6 I/O7 NC NC WE RAS NC A0 A1 A2 A3 VCC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 VSS I/O15 I/O14 I/O13 I/O12 VSS I/O11 I/O10 I/O9 I/O8 NC LCAS UCAS OE A8 A7 A6 A5 A4 VSS
n TSOP
VCC I/O0 I/O1 I/O2 I/O3 VCC I/O4 I/O5 I/O6 I/O7 NC NC WE RAS NC A0 A1 A2 A3 VCC 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 19 20 21 22 44 43 42 41 40 39 38 37 36 35 32 31 30 29 28 27 26 25 24 23 VSS I/O15 I/O14 I/O13 I/O12 VSS I/O11 I/O10 I/O9 I/O8 NC LCAS UCAS OE A8 A7 A6 A5 A4 VSS
A0 - A8 I/O0 - I/O15 RAS
LCAS
UCAS
cycle with a feature called Extended Data Out (EDO).
PRELIMINARY
A42L8316S
(August, 2002, Version 0.1)
A42L8316V
1
AMIC Technology, Inc.
A42L8316 Series
Selection Guide
Symbol tRAC tAA tCAC tOEA tRC tPC Description Maximum RAS Access Time Maximum Column Address Access Time Maximum CAS Access Time Maximum Output Enable ( OE ) Access Time Minimum Read or Write Cycle Time Minimum EDO Cycle Time -30 30 16 9 9 54 14 -35 35 17 10 10 62 16 -40 40 18 11 11 70 18 Unit ns ns ns ns ns ns
Functional Description
The A42L8316 reads and writes data by multiplexing an 18-bit address into a 9-bit row and 9-bit column address. RAS and CAS are used to strobe the row address and the column address, respectively. The A42L8316 has two CAS inputs: LCAS controls I/O0I/O7, and UCAS controls I/O8 - I/O15, UCAS and LCAS function in an identical manner to CAS in that either will generate an internal CAS signal. The CAS function and timing are determined by the first CAS ( UCAS or LCAS ) to transition low and by the last to transition high. Byte Read and Byte Write are controlled by using LCAS and UCAS separately. A Read cycle is performed by holding the WE signal high during RAS / CAS operation. A Write cycle is executed by holding the WE signal low during RAS / CAS operation; the input data is latched by the falling edge of WE or CAS , whichever occurs later. The data inputs and outputs are routed through 16 common I/O pins, with RAS , CAS , WE and OE controlling the in direction. EDO Page Mode operation all 512 columns within a selected row to be randomly accessed at a high data rate. A EDO Page Mode cycle is initiated with a row address latched by RAS followed by a column address latched by CAS . While holding RAS low, CAS can be toggled to strobe changing column addresses, thus achieving shorter cycle times. The A42L8316 offers an accelerated Fast Page Mode cycle through a feature called Extended Data Out, which keeps the output drivers on during the CAS precharge time (tcp). Since data can be output after CAS goes high, the user is not required to wait for valid data to appear before starting the next access cycle. Data-out will remain valid as long as RAS and OE are low, and WE is high; this is the only characteristic which differentiates Extended Data Out operation from a standard Read or Fast Page Read. A memory cycle is terminated by returning both RAS and CAS high. Memory cell data will retain its correct state by maintaining power and accessing all 512 combinations of the 9-bit row addresses, regardless of sequence, at least once every 8ms through any RAS cycle (Read, Write) or RAS Refresh cycle ( RAS -only, CBR, or Hidden). The CBR Refresh cycle automatically controls the row addresses by invoking the refresh counter and controller.
Power-On
The initial application of the VCC supply requires a 200 s wait followed by a minimum of any eight initialization cycles containing a RAS clock. During Power-On, the VCC current is dependent on the input levels of RAS and CAS . It is recommended that RAS and CAS track with VCC or be held at a valid VIH during Power-On to avoid current surges.
PRELIMINARY
(August, 2002, Version 0.1)
2
AMIC Technology, Inc.
A42L8316 Series
Block Diagram
OE WE
WE Clock Generator CAS Clock Generator
OE Clock Generator
UCAS LCAS
I/O0
Column Address Buffers AY0 - AY8 Column Decoders Data I/O Buffers
to I/O15
Sense Amplifiers
A0 - A8
Refresh Counter & Controller . . . 512 . . . ROW DECODER
..
512 x 16 .
.
Row Address Buffers
Memory Array 512 x 512 x 16
AX0 - AX8
RAS
RAS Clock Generator
VCC VSS
Recommended Operating Conditions
Symbol VCC VSS VIH VIL Description Power Supply Input High Voltage Input High Voltage Input Low Voltage
(Ta = 0C to +70C or -40C to +85C) Min. 3.0 0.0 2.0 -0.5 Typ. 3.3 0.0 Max. 3.6 0.0 VCC + 0.3 0.8 Unit V V V V Notes 1 1 1 1
PRELIMINARY
(August, 2002, Version 0.1)
3
AMIC Technology, Inc.
A42L8316 Series
Truth Table
Function Standby Read: Word Read: Lower Byte RAS H L L
UCAS
H L H
LCAS
H L L
WE X H H
OE X L L
Address X Row/Col. Row/Col.
I/Os High-Z Data Out I/O0-7 = Data Out I/O8-15 = High-Z I/O0-7 = High-Z I/O8-15 = Data Out Data In I/O0-7 = Data In I/O8-15 = X I/O0-7 = X I/O8-15 = Data In Data Out Data In Data Out Data Out Data In Data In Data Out Data In Data Out Data In Data Out Data In High-Z High-Z High-Z High-Z
Notes
Read: Upper Byte
L
L
H
H
L
Row/Col.
Write: Word Write: Lower Byte
L L
L H
L L
L L
H H
Row/Col. Row/Col.
Write: Upper Byte
L
L
H
L
H
Row/Col.
Read-Write EDO-Page-Mode Read: Hi-Z -First cycle -Subsequent Cycles EDO-Page-Mode Write -First cycle -Subsequent Cycles EDO-Page-Mode Read-Write -First cycle -Subsequent Cycles Hidden Refresh Read Hidden Refresh Write RAS -Only Refresh CBR Refresh Self Refresh Note:
L L L L L L L LHL LHL L HL HL
L HL HL HL HL HL HL L L H L L
L HL HL HL HL HL HL L L H L L
HL H H L L HL HL H L X X H
LH HL HL H H LH LH L X X X X
Row/Col. Row/Col. Col. Row/Col. Col. Row/Col. Col. Row/Col. Row/Col. Row X X
1,2 2 2 1 1 1, 2 1, 2 2 1
3
1. Byte Write may be executed with either UCAS or LCAS active. 2. Byte Read may be executed with either UCAS or LCAS active. 3. Only one CAS signal ( UCAS or LCAS ) must be active.
PRELIMINARY
(August, 2002, Version 0.1)
4
AMIC Technology, Inc.
A42L8316 Series
Absolute Maximum Ratings*
Input Voltage (Vin) . . . . . . . . . . . . . . . . . . . -0.5V to +4.6V Output Voltage (Vout) . . . . . . . . . . . . . . . . -0.5V to +4.6V Power Supply Voltage (VCC) . . . . . . . . . . -0.5V to +4.6V Operating Temperature (TOPR) . . . . . . . . . . 0C to +70C Storage Temperature (TSTG) . . . . . . . . . -55C to +150C Soldering Temperature X Time (TSOLDER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C X 10sec Power Dissipation (PD) . . . . . . . . . . . . . . . . . . . . . . . 1W Short Circuit Output Current (Iout) . . . . . . . . . . . . . 50mA Latch-up Current . . . . . . . . . . . . . . . . . . . . . . . . . . 200mA
*Comments
Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to this device. These are stress ratings only. Functional operation of this device at these or any other conditions above those indicated in the operational sections of these specification is not implied or intended. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.
DC Electrical Characteristics (VCC = 3.3V 0.3V, VSS = 0V, Ta = 0C to +70C or -40C to +85C)
Symbol IIL Parameter Min. Input Leakage Current Output Leakage Current Operating Power Supply Current TTL Supply Current Supply Current Average Power Supply Current, RAS Refresh Mode EDO Page Mode Average Power Supply Current CAS -beforeRAS Refresh Power Supply Current CMOS Standby Power Supply Current Self Refresh Mode Current -5 -30 Max. +5 Min. -5 -35 Max. +5 Min. -5 -40 Max. +5 A 0V Vin VCC Pins not under Test = 0V DOUT disabled, 0V Vout VCC RAS , UCAS , LCAS and Address cycling; tRC = min. RAS = UCAS = LCAS = VIH RAS and Address cycling, UCAS = LCAS = VIH, tRC = min. RAS and address = VIL, UCAS , LCAS and Address cycling; tPC = min. RAS and UCAS or LCAS cycling; tRC = min. RAS = UCAS = LCAS = VCC - 0.2V RAS = CAS VSS+0.2V All other input high levels are VCC-0.2V or input low levels are VSS +0.2V IOUT = -2.0mA IOUT = 2.0mA 1 1, 2 Unit Test Conditions Notes
IOL ICC1
-5 -
+5 110
-5 -
+5 105
-5 -
+5 100
A mA
ICC2
-
2.5
-
2.5
-
2.5
mA
ICC3
-
110
-
105
-
100
mA
ICC4
-
110
-
105
-
100
mA
1, 2
ICC5
-
110
-
105
-
100
mA
1
ICC6
-
1.5
-
1.5
-
1.5
mA
ICC7
-
1.0
-
1.0
-
1.0
mA
VOH VOL
Output Voltage
2.4 -
0.4
2.4 -
0.4
2.4 -
0.4
V V
PRELIMINARY
(August, 2002, Version 0.1)
5
AMIC Technology, Inc.
A42L8316 Series
AC Characteristics (VCC = 3.3V 0.3V, VSS = 0V, Ta = 0C to +70C or -40C to +85C)
Test Conditions: Input timing reference level: VIH/VIL=2.0V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns Std Symbol tT 1 tRC -30 Parameter Min. Transition Time (Rise and Fall) Random Read or Write Cycle Time RAS Precharge Time RAS Pulse Width CAS Pulse Width RAS to CAS Delay Time RAS to Column Address Delay Time CAS to RAS Hold Time CAS Hold Time CAS to RAS Precharge Time Row Address Setup Time Row Address Hold Time CAS to Output in Low Z Access Time from RAS Access Time from CAS Access Time from Column Address OE Access Time Column Address Hold Time from RAS 1 54 Max. 50 Min. 1 62 Max. 50 Min. 1 70 Max. 50 ns ns 4, 5 -35 -40 Unit Notes
#
2 3 4 5 6
tRP tRAS tCAS tRCD tRAD
20 30 5 10 8
10K 10K 21 14
23 35 6 10 8
10K 10K 25 18
26 40 7 10 8
10K 10K 29 22
ns ns ns ns ns 6 7
7 8 9 10 11 12 13 14 15
tRSH tCSH tCRP tASR tRAH tCLZ tRAC tCAC tAA
5 29 5 0 5 3 -
30 9 16
6 31 5 0 6 3 -
35 10 17
7 33 5 0 7 3 -
40 11 18
ns ns ns ns ns ns ns ns ns 8 6,7 6, 13 7, 13
16 17
tOEA tAR
26
9 -
31
10 -
36
11 -
ns ns
PRELIMINARY
(August, 2002, Version 0.1)
6
AMIC Technology, Inc.
A42L8316 Series
AC Characteristics (continued) (VCC = 3.3V 0.3V, VSS = 0V, Ta = 0C to +70C or -40C to +85C)
Test Conditions: Input timing reference level: VIH/VIL=2.0V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns Std Symbol tRCS tRCH tRRH -30 Parameter Min. 18 19 20 Read Command Setup Time Read Command Hold Time Read Command Hold Time Reference to RAS Column Address to RAS Lead Time Output Hold After CAS Low Output Buffer Turn-Off Delay Time Column Address Setup Time Column Address Hold Time
OE Low to CAS High Set Up
-35 Min. 0 0 0 Max. Min. 0 0 0
-40 Unit Notes Max. ns ns ns 9 9
#
Max. -
0 0 0
21
tRAL
16
-
17
-
18
-
ns
22 23 24 25 26 27 28 29 30 31
tCOH tOFF tASC tCAH tOES tWCS tWCH tWCR tWP tRWL
3 0 5 6 0 5 26 5 9
3 -
3 0 6 7 0 6 31 6 10
3 -
3 0 7 8 0 7 36 7 11
3 -
ns ns ns ns ns ns ns ns ns ns 11 11 8, 10
Write Command Setup Time Write Command Hold Time Write Command Hold Time to RAS Write Command Pulse Width Write Command to RAS Lead Time Write Command to CAS Lead Time Data-in setup Time Data-in Hold Time Data-in Hold Time to RAS
32
tCWL
7
-
7
-
7
-
ns
33 34 35
tDS tDH tDHR
0 5 26
-
0 6 31
-
0 7 36
-
ns ns ns
12 12
PRELIMINARY
(August, 2002, Version 0.1)
7
AMIC Technology, Inc.
A42L8316 Series
AC Characteristics (continued) (VCC = 3.3V 0.3V, VSS = 0V, Ta = 0C to +70C or -40C to +85C)
Test Conditions: Input timing reference level: VIH/VIL=2.0V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns Std Symbol -30 Parameter Min. 36 37 tRWC tRWD Read-Modify-Write Cycle Time RAS to WE Delay Time (Read-Modify-Write) CAS to WE Delay Time (ReadModify-Write) Column Address to WE Delay Time (Read-Modify-Write) OE Hold Time from WE OE High Pulse Width Read or Write Cycle Time (EDO Page) Access Time from CAS Precharge (EDO Page) CAS Precharge Time EDO Page Mode RMW Cycle Time EDO Page Mode CAS Pulse Width (RMW) RAS Pulse Width CAS Setup Time ( CAS -before- RAS ) CAS Hold Time ( CAS -before- RAS ) RAS to CAS Precharge Time (EDO Page) 75 40 Max. Min. 85 46 Max. Min. 95 52 Max. ns ns 11 -35 -40 Unit Notes
#
38
tCWD
19
-
21
-
23
-
ns
11
39
tAWD
26
-
28
-
30
-
ns
11
40 41 42 43
tOEH tOEP tPC tCPA
5 5 14 -
16
6 5 16 -
18
7 5 18 -
20
ns ns ns ns 14 13
44 45 46
tCP tPCM tCRW
5 37 28
-
6 40 30
-
7 43 32
-
ns ns ns
47 48
tRASP tCSR
30 5
200K -
35 5
200K -
40 5
200K -
ns ns 3
49
tCHR
10
-
10
-
10
-
ns
3
50
tRPC
10
-
10
-
10
-
ns
3
PRELIMINARY
(August, 2002, Version 0.1)
8
AMIC Technology, Inc.
A42L8316 Series
AC Characteristics (continued) (VCC = 3.3V 0.3V, VSS = 0V, Ta = 0C to +70C or -40C to +85C)
Test Conditions: Input timing reference level: VIH/VIL=2.0V/0.8V Output reference level: VOH/VOL=2.0V/0.8V Output Load: 2TTL gate + CL (50pF) Assumed tT=2ns Std Symbol -30 Parameter Min. 51 tOEZ Output Buffer Turn-off Delay from OE RAS pulse width ( C -B-R self refresh) RAS precharge time ( C -B-R self refresh) CAS hold time ( C -B-R self refresh) Max. 3 Min. Max. 3 Min. Max. 3 ns 8 -35 -40 Unit Notes
#
52
tRASS
100
-
100
-
100
-
s
53
tRPS
54
-
62
-
70
-
ns
54
tCHS
-50
-
-50
-
-50
-
ns
Notes: 1. ICC1, ICC3, ICC4, and ICC5 depend on cycle rate. 2. ICC1 and ICC4 depend on output loading. Specified values are obtained with the outputs open. 3. An initial pause of 200s is required after power-up followed by any 8 RAS cycles before proper device operation is achieved. In the case of an internal refresh counter, a minimum of 8 CAS -before- RAS initialization cycles instead of 8 RAS cycles are required. 8 initialization cycles are required after extended periods of bias without clocks. 4. AC Characteristics assume tT = 2ns. All AC parameters are measured with a load equivalent to two TTL loads and 50pF, VIL (min.) GND and VIH (max.) VCC. 5. VIH (min.) and VIL (max.) are reference levels for measuring timing of input signals. Transition times are measured between VIH and VIL. 6. Operation within the tRCD (max.) limit insures that tRAC (max.) can be met. tRCD (max.) is specified as a reference point only. If tRCD is greater than the specified tRCD (max.) limit, then access time is controlled exclusively by tCAC. 7. Operation within the tRAD (max.) limit insures that tRAC (max.) can be met. tRAD (max.) is specified as a reference point only. If tRAD is greater than the specified tRAD (max.) limit, then access time is controlled exclusively by tAA. 8. Assumes three state test load (5pF and a 500 Thevenin equivalent). 9. Either tRCH or tRRH must be satisfied for a read cycle. 10. tOFF (max.) defines the time at which the output achieves the open circuit condition; it is not referenced to output voltage levels. 11. tWCS, tWCH, tRWD, tCWD and tAWD are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS tWCS (min.) and tWCH tWCH (min.), the cycle is an early write cycle and data-out pins will remain open circuit, high impedance, throughout the entire cycle. If tRWD tRWD (min.) , tCWD tCWD (min.) and tAWD tAWD (min.), the cycle is a read-modify-write cycle and the data out will contain data read from the selected cell. If neither of the above conditions is satisfied, the condition of the data out at access time is indeterminate. 12. These parameters are referenced to UCAS and LCAS leading edge in early write cycles and to WE leading edge in read-modify-write cycles. 13. Access time is determined by the longer of tAA or tCAC or tCPA. 14. tASC tCP to achieve tPC (min.) and tCPA (max.) values.
PRELIMINARY
(August, 2002, Version 0.1)
9
AMIC Technology, Inc.
A42L8316 Series
Word Read Cycle
tRC(1) tRAS(3) tRP(2)
RAS
tCSH(8) tCRP(9) tRCD(5) tRSH(7) tCAS(4) tCRP(9)
UCAS LCAS
tRAD(6) tASR(10) tRAH(11) tASC(24)
tRAL(21) tCAH(25)
A0~A8
Row Address
tAR(17)
Column Address
tRCH(19) tRRH(20)
tRCS(18)
WE
tOEA(16)
OE
tCAC(14) tAA(15) tRAC(13) tOFF(23) tOEZ(51)
I/O 0 ~ I/O 15
High-Z
tCLZ(12)
Valid Data-out
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
10
AMIC Technology, Inc.
A42L8316 Series
Word Write Cycle (Early Write)
tRC(1) tRAS(3) tRP(2)
RAS
tCSH(8) tCRP(9) tRCD(5) tRSH(7) tCAS(4) tCRP(9)
UCAS LCAS
tAR(17) tRAD(6) tASR(10) tRAH(11) tASC(24)
tRAL(21) tCAH(25)
A0~A8
Row Address
Column Address
tWCR(29) tCWL(32) tRWL(31) tWP(30)
WE
tWCS(27) tWCH(28)
OE
tDHR(35) tDS(33) tDH(34)
I/O0 ~ I/O15
Valid Data-in
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
11
AMIC Technology, Inc.
A42L8316 Series
Word Write Cycle (Late Write)
tRC(1) tRAS(3) tRP(2)
RAS
tCSH(8) tCRP(9) tRCD(5) tRSH(7) tCAS(4) tCRP(9)
UCAS LCAS
tAR(17) tRAD(6) tASR(10) tRAH(11) tASC(24)
tRAL(21) tCAH(25)
A0~A8
Row Address
Column Address
tCWL(32) tRWL(31) tWCR(29) tWP(30)
WE
tOEH(40)
OE
tDHR(35) tDS(33) tDH(34)
I/O0 ~ I/O15
High-Z Vaild Data-in
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
12
AMIC Technology, Inc.
A42L8316 Series
Word Read-Modify-Write Cycle
tRWC(36) tRAS(3) tRP(2)
RAS
tCSH(8) tCRP(9) tRCD(5) tRSH(7) tCRP(9)
UCAS LCAS
tAR(17) tRAD(6) tASR(10) tRAH(11) tASC(24) tCAH(25)
A0~A8
Row Address
Column Address
tAWD(39) tRCS(18) tRWD(37) tCWD(38) tCWL(32) tRWL(31)
WE
tWP(30) tOEA(16) tOEZ(51)
OE
tCAC(14) tAA(15) tRAC(13) tDS(33) tOEH(40) tDH(34)
I/O 0 ~ I/O 15
High-Z Data-out
tCLZ(12)
Data-in
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
13
AMIC Technology, Inc.
A42L8316 Series
EDO Page Mode Word Read Cycle
tRASP(47)
tRP(2)
RAS
tCSH(8) tCRP(9) tRCD(5) tCAS(4) tCP(44) tPC(42) tCAS(4) tRSH(7) tCRP(9) tCAS(4)
UCAS LCAS
tRAD(6) tRAH(11) tCSH(8) tAR(16) tASR(10) tCAH(25) tASC(24) tRAL(21) tCAH(25) tASC(24)
A0~A8
Row
Column
tCAH(25) tRCS(18)
Column
tRCS(18) tRCH(25)
Column
tRCS(18) tRCH(19)
WE
tAA(15) tCPA(43) tOEA(16) tOEA(16) tOES(26) tCAC(14) tCAC(14) tCLZ(12) tCOH(22) tAA(15) tRRH(20)
OE
tRAC(13)
tOEP(41) tCAC(14) tOEZ(51)
tOFF(23) tOEZ(51)
I/O 0 ~ I/O 15
Data-out
Data-out
Data-out
tCLZ(12)
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
14
AMIC Technology, Inc.
A42L8316 Series
EDO Page Mode Early Word Write Cycle
tRASP(47)
tRP(2)
RAS
tCSH(8) tCRP(9) tRCD(5) tCAS(4) tCP(44) tCAS(4) tCP(44) tCAS(4) tPC(42) tRSH(7) tCRP(9)
UCAS LCAS
tRAL(21) tRAD(6) tASR(10) tRAH(11) tASC(24) tCAH(25) tASC(24) tCAH(25) tASC(24) tCAH(25)
A0~A8
Row
Column
tCWL(32) tWCS(27) tWCS(27) tWCH(28)
Column
tCWL(32) tWCS(27) tWCH(28)
Column
tCWL(32) tRWL(31) tWCH(28)
WE
tWP(30) tWP(30) tWP(30)
OE
tDH(34) tDS(33) tDS(33)
tDH(34) tDS(33)
tDH(34)
I/O 0 ~ I/O 15
Data-in
Data-in
Data-in
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
15
AMIC Technology, Inc.
A42L8316 Series
EDO Page Mode Word Read-Modify-Write Cycle
tRASP(47)
tRP(2)
RAS
tCSH(8) tRCD(5) tCRW(46) tCP(44) tCRW(46) tCP(44) tCRW(46) tPCM(45) tRSH(7) tCRP(9)
tCRP(9)
UCAS LCAS
tRAD(6) tASR(10) tRAH(11) tCAH(25) tASC(24) tCAH(25) tASC(24) tRAL(21) tCAH(25) tASC(24)
A0~A8
Row
Column
Column
tCWL(32)
Column
tCWL(32) tCWL(32) tRWL(31)
tRWD(37) tRCS(18) tCWD(38) tCWD(38) tCWD(38)
WE
tWP(30) tAWD(39) tAWD(39) tWP(30) tAWD(39) tWP(30)
tOEA(16)
tOEA(16) tOEH(40)
tOEA(16)
OE
tCAC(14) tAA(15) tOEZ(51) tRAC(13)
tCPA(43) tAA(15) tOEZ(51) tDH(34) tDS(33)
tCPA(43) tAA(15) tOEZ(51) tDH(34) tDS(33) tDH(34) tDS(33)
I/O0 ~ I/O 15
High-Z
tCLZ(12) tCLZ(12) tCLZ(12)
Data-in Data-out Data-out
Data-in Data-out
Data-in
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
16
AMIC Technology, Inc.
A42L8316 Series
RAS Only Refresh Cycle
tRC(1) tRAS(3) tRP(2)
RAS
tRPC(50)
tCRP(9)
UCAS LCAS
tASR(10) tRAH(11)
A0~A8
Row
Note: WE, OE = Don't care.
: High or Low
CAS Before RAS Refresh Cycle
tRC(1) tRP(2) tRAS(3) tRP(2)
RAS
tRPC(50) tCP(44) tCSR(48) tCHR(49)
UCAS LCAS I/O 0 ~ I/O 15
tOFF(23)
High-Z
Note: WE, OE, Address = Don't care.
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
17
AMIC Technology, Inc.
A42L8316 Series
Hidden Refresh Cycle (Word Read)
tRC(1) tRAS(3) tRP(2) tRAS(3)
tRC(1) tRP(2)
RAS
tAR(17) tCRP(9) tRCD(5) tRSH(7) tCHR(49) tCRP(9)
UCAS LCAS
tASR(10) tRAD(6) tRAH(11) tASC(24) tRAL(21) tCAH(25)
A0~A8
Row
Column
tRCS(18)
tRRH(20)
WE
tAA(15) tOEZ(51) tOEA(16)
OE
tCAC(14) tCLZ(12) tRAC(13)
tOFF(23)
I/O0 ~ I/O15
High-Z Valid Data-out
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
18
AMIC Technology, Inc.
A42L8316 Series
Hidden Refresh Cycle (Early Word Write)
tRC(1) tRAS(3) tRP(2) tRAS(3)
tRC(1) tRP(2)
RAS
tAR(17) tCRP(9) tRCD(5) tRSH(7) tCHR(49) tCRP(9)
UCAS LCAS
tRAD(6) tASR(10) tRAH(11) tASC(24) tRAL(21) tCAH(25)
A0~A8
Row
tWCS(27)
Column
tWCH(28) tWP(30)
WE
OE
tDS(33)
tDH(34)
I/O 0 ~ I/O 15
Valid Data-in
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
19
AMIC Technology, Inc.
A42L8316 Series
EDO Page Mode Read-Early-Write Cycle (Pseudo Read-Modify-Write)
tRASP(47)
tRP(2)
RAS
tCSH(8) tPC(42) tCRP(9) tRCD(5) tCAS(4) tCP(44) tCAS(4) tPC(42) tCP(44) tRSH(7) tCAS(4) tCPR(9)
UCAS LCAS
tRAL(21) tRAD(6) tASR(10) tRAH(11) tASC(24) tCAH(25) tASC(24) tCAH(25) tASC(24) tCAH(25)
A0~A8
Row
Column
Column
tRCH(19)
Column
tRCS(18) tWCS(27) tWCH(28)
WE
tAA(15) tRAC(13) tCAC(14) tOEA(16)
tAA(15) tCAP(43) tCAC(14) tDS(33) tDH(34)
OE
tCOH(22)
I/O0 ~ I/O15
Data-out
Data-out
Data-in
: High or Low
PRELIMINARY
(August, 2002, Version 0.1)
20
AMIC Technology, Inc.
A42L8316 Series
Self Refresh Mode
tRP(2)
tRASS(52)
tRPS(53)
RAS
tRPC(50)
tCSR(48)
tCHS(54)
tCRP(9)
UCAS LCAS
tCP(44) tASR(10)
A0~A8
tOFF(23)
ROW
COL
I/O 0 ~ I/O 15
High-Z
Note: WE, OE = Don't care.
: High or Low
n Self Refresh Mode. a. Entering the Self Refresh Mode: The A42L8316 Self Refresh Mode is entered by using CAS before RAS cycle and holding RAS and CAS signal "low" longer than 100s. b. Continuing the Self Refresh Mode: The Self Refresh Mode is continued by holding RAS "low" after entering the Self Refresh Mode. It does not depend on CAS being "high" or "low" after entering the Self Refresh Mode continue the Self Refresh Mode. c. Exiting the Self Refresh Mode: The A42L8316 exits the Self Refresh Mode when the RAS signal is brought "high".
PRELIMINARY
(August, 2002, Version 0.1)
21
AMIC Technology, Inc.
A42L8316 Series
Capacitance (f = 1MHz, Ta = Room Temperature, VCC = 3.3V 0.3V)
Symbol CIN1 CIN2 Signals A0 - A8 RAS , UCAS , Input Capacitance Parameter Max. 5 7 Unit pF pF Test Conditions Vin = 0V Vin = 0V
LCAS , WE ,
OE CI/O I/O0 - I/O15 I/O Capacitance 7 pF Vin = Vout = 0V
Ordering Codes
Package RAS Access Time SOJ 40L (400mil) TSOP 40/44 L type II (400mil) TSOP 40/44 L type II (400mil) 30ns A42L8316S-30 A42L8316V-30 A42L8316V-30U 35ns A42L8316S-35 A42L8316V-35 A42L8316V-35U 40ns A42L8316S-40 A42L8316V-40 A42L8316V-40U Self-Refresh Yes Yes Yes
Note: -U is for industrial operating temperature range.
PRELIMINARY
(August, 2002, Version 0.1)
22
AMIC Technology, Inc.
A42L8316 Series
Package Information SOJ 40L (400mil) Outline Dimensions
unit: inches/mm
40
21
1
20
D C A2 A A1 S Seating Plane b b1
HE
E
e
y D
L
e1
Symbol
A A1 A2 b1 b C D E e e1 HE L S y
Dimensions in inches Min 0.025 0.105 0.026 0.016 0.008 1.020 0.395 0.044 0.355 0.430 0.081 0 Nom 0.110 0.028 0.018 0.010 1.025 0.400 0.050 0.366 0.440 0.093 Max 0.144 0.115 0.032 0.022 0.014 1.030 0.405 0.056 0.376 0.450 0.105 0.050 0.004 10
Dimensions in mm Min 0.64 2.67 0.66 0.41 0.20 25.91 10.03 1.12 9.114 10.92 2.083 0 Nom 2.79 0.71 0.46 0.25 26.04 10.16 1.27 9.383 11.18 2.39 Max 3.66 2.92 0.81 0.56 0.36 26.16 10.29 1.42 9.652 11.43 2.70 1.27 0.10 10
Notes: 1. The maximum value of dimension D includes end flash. 2. Dimension E does not include resin fins. 3. Dimension e1 is for PC Board surface mount pad pitch design reference only. 4. Dimension S includes end flash.
PRELIMINARY
(August, 2002, Version 0.1)
23
AMIC Technology, Inc.
A42L8316 Series
Package Information TSOP 40/44L (Type II) (400mil) Outline Dimensions
unit: inches/mm
44
HE
E
L L1
1 D
A2
A1
A
D
S
B
e
y
L
L1
Dimensions in inches
Dimensions in mm Min 0.05 0.95 0.32 0.08 18.28 10.03 11.56 0.40 1 Nom 1.00 0.37 0.13 18.41 10.16 0.80 BSC 11.76 0.50 0.80 3 Max 1.20 0.15 1.05 0.42 0.23 18.54 10.29 11.96 0.60 0.90 0.10 5
Symbol
A A1 A2 B c D E e HE L L1 S y
Min 0.002 0.037 0.013 0.003 0.720 0.395 0.455 0.016 1
Nom 0.039 0.015 0.005 0.725 0.400 0.031 BSC 0.463 0.020 0.031 3
Max 0.047 0.006 0.041 0.017 0.009 0.730 0.405 0.471 0.024 0.035 0.004 5
Notes: 1. The maximum value of dimension D includes end flash. 2. Dimension E does not include resin fins. 3. Dimension S includes end flash.
PRELIMINARY
(August, 2002, Version 0.1)
24
AMIC Technology, Inc.
c

▲Up To Search▲

Price & Availability of A42L8316

	To Download A42L8316 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .